Top 19 Best Solder Fume Extractor of 2022 (Reviews)
- Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction.
- A 24-inch flexible tube, Fume hood can adjust direction according to actual needs.
- Adjustable optimized 6000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. The fan speed is adjustable. Suction: 40W, 6000 RPM, 52CFM, Noise Level: 55dbm, Life Expectancy: 50,000 hours, Static pressure: 125mmH2O.
- Easy to replace the filter, Includes one replacement filter. Working temperature: -20℃～60℃, Power consumption: 120V-240V, 40W ( 12V, 4A Power supply).
- US-based customer support, 30 days full satisfaction no question asked return period.
- Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station
- 0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room.
- Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to the ground. Handy carrying handle allows you to move the unit easily.
- Easy to replace filter, Includes one replacement filter. Working temperature: -20℃～60℃, Power consumption: 120V, 30W (50 / 60Hz).
- US based customer support, 30 days full satisfaction no question asked return period.
- Fume extractor soldering FES 150 has Wide range of applications: Smoke Removal, Dust Removal ,Deodorization, Harmful Gases Removal ,Beauty nail salon, Moxibustion and more;
- Multiple filtration system (3 layers) - KNOKOO fume absorber continuously exhaust the welding fume and lead mist, and rapid discharges it into the Pre-filter, HEPA filter and activated carbon filter to purifier smoke and unpleasant odors. each layer can be replaced separately. Three -layer filter Structure has larger dust capacitance than single-layer filter core, longer service time of filter core and more cost-saving.
- Energy-saving and Environmental Protection KNOKOO fume extractor creates a powerful Systemic Flow 278m³/h to exhaust and purify air, high purification rate allow you to breathe fresh air again. Frequency converter DC motor, less power consumption, smoke filtered and discharged into the air, in line with the requirements of environmental impact assessment, environmentally friendly.
- 360-degree universal adjustable smoking duct - The suction pipe is composed of many shortened pipes and each interface can be bent freely, greatly improving the adjustment angle.Power Failure Protection: When the machine is working, turning off the three-in-one switch on the side will automatically cut off the power.
- Handle On Both Sides With built-in handles on both sides, mobile devices are more convenient.
- SUCTION UPGRADE - The power and suction have been upgraded from 80W to 130W, from 180m3/h to 250m3/h. The suction per unit power has been greatly enhanced. Solder fume extractor has 3-level speed regulation, you can control the speed of suction according to the amount of smoke. Never let fume float their way over to your face.
- FILTER PLUS+ - Three-layer filter effectively absorbs PM50, PM0.5 and harmful gases. Fume extractor use square vertical filter, which has 4 times larger dust capacitance than flat filter core. The expanded area of the filter element can reach 2.1 m2. Multiple filters with larger dust capacity ensure your safety.
- 15’’x10’’ LARGE SMOKING AREA - The smoker is equipped with two aerodynamics diamond covers. The size of the black cover is 4.7 "x 8.7", equal to a piece of A4 paper. The size of the transparent cover is 15 "x 10", 3 times the size of A4 paper, which can greatly improve the smoking effect. You can choose different diamond covers according to different sizes of PCB.
- SMALL SIZE - The size of fume extractor is 265*265*475mm, suitable for small workbenches and home DIY, can be stuffed under the table. It only takes up a little space and will not get in the way of your work, avoid clutter in your work environment.
- SLEEP LEVEL MUTE - The higher the power will make the noise higher. But, the lowest level of our smoke absorber is only 45 dB, and the highest is not more than 55 dB. When it runs, the noise is as low as running computer. Only when you has a quiet and comfortable working environment, you can improve work efficiency.
- SMOKE ABSORBER, w/C1571, FA-430
- FA430-KIT1 Smoke Absorber with C1571
- Powerful suction
- Quiet operation
- 3-airflow adjustment modes: High, Medium, Low
- [BUILT-IN AIR CIRCULATION FILTER] Air circulation filter can prevent indoor fume from being discharged to the outside directly, achieving smoke absorb and purify air.
- [Universal smoking pipe]Smoking pipe-360-degree universal adjustment, no need for external support. Can adjust the length of the pipe freely, adjustable air volume, directional adjustment of the air duct, and free positioning.
- [HIGH PERFORMANCE MOTOR] High-power brushless DC motor to provide large air volume while keep low noise.High inhalation force and high smoking efficiency.
- [SIMPLE OPERATION AND INSTALLATION] Installation is simple and convenient, no additional pipes are needed, saving space.
- [TRIPLE FILTERS EQUIPPED] Pre-filter, medium filter and high efficiency filter to absorb the fume effectively, provide you with a fresh and comfortable working environment. The primary, medium and main filter elements can be replaced separately, which prolongs the service life and reduces the use cost.
- ✌ - Horizontal or vertical : Works efficiently in different environments. As long as you turn on the button, you can stop breathing the evil and smelly soldering fumes.
- ⚡ - ESD protection : Surge protection suppress voltage transients and divert excessive current away from sensitive electronic components to protect your electronics.
- 🎁 - Easy to replace the filter : Come with 2 filters, made of features urethane foam and activated carbon. Capture and absorbs of fumes and harmful smoke, ensures a breathable environment in your workspace.
- 🔇 - EC motor : It can absorb smoke from 4-5 inches away, low noise, high energy saving, small vibration, Long-lasting working time for over 57000 hours.
- 🔌 - Smooth surface : Made of high-grade ABS components, which makes it very durable and sturdy. Its small size allows users to keep it close to themselves without occupying too much space.
- ELIMINATES IRRITATING ODORS: Featuring 3 Stage Filter, the fume extractor effectively absorbs and seizes fumes from solder, flux, chemicals, gases, and ease to overcome disturbing odors in your working spaces.
- HIGHLY VERSATILE: The high versatility of this fume extractor soldering fan enables you to stay relaxed and concentrated throughout Soldering, Wood-Burning (Pyrography), 3D Printing, Stained Glass, and Crafting, Nail Salons, Woodworking, Jewelry Making, and Smoking.
- STRONG SUCTION WITH SLIGHT NOISE: The predominantly optimized soldering fan empowers you to remove fumes even 4-5 Inches away with minor noise. You will experience fresh, focused, and devoted working surroundings with this solder fan.
- UNUSUAL STORAGE SAVER: The highly compatible design of this solder filter heightens its portability, allowing it to take a minimum space to avoid cluttering on your desktop.
- TOP-NOTCH MATERIAL: MUIN is working diligently in making expediting products so far. We ensure quality by using ABS material in the construction of this solder extractor fan. Click ADD TO CART and be ready to get a sturdy solder fumes extractor at your doorstep!
- 99.97% PURIFICATION RATE - BAOSHISHAN fume extractor can create a powerful 106 CFM airflow to exhaust and purify air. It has passed the environmental impact assessment test and certification, the purified air meets the hygienic standards. High purification rate allow you to breathe fresh air again.
- 3-STAGE FILTER - The 3D filters has 4 times the dust holding capacity of the old one. Cotton filter, central High Efficiency Particulate Air filter and activated carbon filter absorb all smoke, dust and harmful gases at work. The upwind diversion design allows harmful particles and gases to contact the 3-stage filters more fully and evenly, making the filter element more efficient. Truly no emissions.
- WON'T TAKE UP SPACE - Our fume extractor's size is smaller than A4 paper. Suitable for small solder station and home DIY, 10.5x10.5x16 inch bulk can be stuffed under the table and won’t hinder your leg free and take up no space. Also equipped with 4 quality universal wheels with buckles, convenient to move and fix at any station.
- HIGHLY SEALED STRUCTURE - Our metal latches very tightly closed the main filter bulk, completely seal the fumes during operation to prevent any leak. Each inner connecting section of the suction pipe has fine convex points, greatly enhance the stability and sealing of the pipeline, can be bent and fixed at any angle at will.
- OUTSTANDING CUSTOMER SERVICE - BAOSHISHAN provides 1 month returning for quality problems, 12-months warranty and online technical support. Please feel free to contact us with any questions "alismile2014" and the host is "hotmail". We will solve problems for you within 24 hours. Our goal is to make you 100% satisfied.
- 【Strong Absorption】 With the large 15050 pure copper motor and the 3300 RPM high suction silent solder fan，the effective smoke absorber distance can reach 7.9in. The absorption of the SainSmart Solder Fume Extractor performs 30% better than other Solder Fume Extractor and only generates less noise.
- 【Activated Carbon Filter】 The 0.3in thick activated carbon filter cotton effectively absorbs and seizes fumes from solder, flux, laser engraving and chemicals. It can filter the toxic substances and purify your work area effectively. The parcel includes 3 pieces of extra activated carbon filter cotton for replacement. It is very easy to replace and we suggest that you replace the filter every 3 months.
- 【Sturdy Metal Frame Design】Made of ESD-safe metal, it is much sturdier and more durable than the solder smoke absorber with plastic frame. It can be placed on your working area stably, no worries about being easily moved during use.
- 【User Friendly Design】Both the carrying handle and the 1.3m long power cord allow you to move the machine easily. 4 non-slip heavy-duty rubber feet anchor the unit to the ground. No assembly required, just plug in and press the switch to use.
- 【With 2 Magnetic Helping Hands】This solder smoke absorber comes with 2 magnetic soldering helping hands making simple repairs even easier. The helping hands can be rotated in 360 degrees and you can remove them out of the way when you don’t need them.
- FES350 laser fume extractor has 4-fold multiple filtration, rapid purification, 45% power saving than other similar products.
- Applicable fields: Soldering robot, tin furnace, immersion tin, laser marking, laser engraving, DIY Solder Working
- Laser marking fume extractor purification machine FES350 uses a microcomputer chip to control the digital display remote control. Multi-layer filtration, rapid purification. The use of multiple filtration design ensures more thorough purification of harmful smoke and dust. Carry out innovative noise reduction structure design to make the working environment more peaceful and pleasant
- The air inlet adopts a split-flow design so that harmful gas particles and harmful gases can be more fully filtered by HEPA filter and absorbed by activated carbon filter cotton, which greatly improves the filtration efficiency.
- 3 IN 1 Solder Fume Extractor with 3X LED Magnifying Lamp and Flexible Arms Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station
- High-Efficient Absorb: Optimized 3300 RPM high suction fan is low noise, Strong absorption, effectively absorb the toxic fumes, air purification.
- Upgraded Design: Pure copper motor.The enclosure is made from metal.4 non-slip heavy-duty rubber feet anchor the unit to the ground. A handy carrying handle allows you to move the unit easily.
- Soldering Flexible Arms: 2 adjustable metal gooseneck arms, two 4.5" arms helping hand arms, completely free your hands up and work easier than ever before.
- 3X Magnifier Lamp: Magnified 3 times real glass lens helps you to view details or tiny things, improves your work precision and efficiency, keeps your eye from the strain.
- [SUPER PURIFICATION] The 100W Poafamx fume extractor creates a 152 CFM airflow to absorb smoke, dust, harmful gas and purify air. The purification rate is up to 99.998% which allows you to breathe fresh air again and no more headache.
- [3-LAYER TOWER FILTER STRUCTURE] Solder fume extractor has 3 stage filter - Cotton filter, central H-E-P-A filter and activated carbon filter. The dust capacitance of 3-layer tower filter structure is 4 times that of ordinary single-layer filter core, each layer can be replaced separately.
- [UNIVERSAL SLUB TUBE] The fourth generation smoking tube is used in our fume extractor, which can extend or shorten the tube length at any time and adapt to various worktops. The high sealing of the tube ensures small wind resistance and 100% smoke absorption.
- [KNOB TO ADJUST SUCTION] Knob adjustment can continuously adjust the suction. It is not necessary to adjust the suction to the maximum. Just adjust according to your smoke and dusty.
- [GREAT FOR SMALL WORKBENCH] The size of fume extractor is 280*250*280mm, it's about the size of A4 paper. You can put it on the table or under the table, suitable for small workbenches and home DIY. It only takes up a little space and will not get in the way of your work, you can place it as you like.
- 【How Do You Choose the Best Solder Fume Extractor?】1)Power Rating- Since a solder smoke absorber has a fan inside, making sure that this fan is powerful enough for collecting all of the smoke is quite important. 2) Air Flow-Another way to get an idea of the performance of your solder smoke absorber is to check its airflow capacity.3) Warranty-While it does not affect the performance of your solder smoke absorber directly,
- 【Power Rating】While it is decently powerful, its airflow rating is given in RPM and not in CFM. It is a portable and compact est Solder fume extractor with a noise-free Optimized 3000 RPM fan suction unit.
- 【Very compact and light-weighted】The greatest thing about the 180° Solder Smoker Absorber is that 0.4 inches thick activated filter absorbs and captures solder fumes effectively and helps to dissipation into the room.
- 【Power Consumption & Free Replacement Filter】Temperature range: -20°C to 60°C; power consumption: 120V, 30W (50/60Hz).It also comes with a Replacement Filter and It’s really easy to replace it.
- 【WARRANTY and SERVICE】Provides you with 24-hour email contact service & 30-day money-back guarantee
- LIGHTWEIGHT AND PORTABLE - High Vacuum Fume Extraction System.
- EQUIPPED WITH CURRENT SENSOR TECHNOLOGY - Automatically Starts/Stops Extraction When Current Is Detected
- QUIET OPERATION - Operates At A Sound Level Of <80Db(A)
- VERSATILE - Can be Used for Stick (Light Duty), Tag, Mig, and Flux-Cored (Light Duty)
- MULTIPLE EXTRACTION SETTINGs - CFM Strength Can Be Selected Based On Environmental Conditions
- Multi-functions: Solder Fume Extractor come with silicone repair mat，3 Stage Filter and 2 flexible soldering helping arms making simple repairs even easier, helps your repair or working perfect.
- Solder Fume Extractor: Pure copper motor, with 3300 RPM high suction fan is low noise, Strong absorption, the fume extractor effectively absorbs and seizes fumes from solder, flux, chemicals, gases, and ease to overcome disturbing odors in your working spaces.
- Silicone soldering mat: Insulation solder mat can resist the temperature as high as 806°F (430℃), fireproof and is anti-corrosive, anti-scratch and non be out of shape, the Silicone solder pad is perfect for soldering iron, repair cellphones, sports watch, camera, toys, eyeglasses and more small device.
- Magnetic Soldering Arms: Two 9" adjustable gooseneck arms with a strong magnetic base, which have a powerful attraction to the steel base, Completely free your hands up and work easier than ever before.
- What You Can Get: 1 x solder smoker absorber, 1 x silicone soldering mat, 2 x magnetic helping hands, 2 x carbon filter. We proudly stand behind all of our products 100%, which is why we offer a Full 1 Year Warranty.
- Size MINI - The size of fume extractor is 153*153*76.5mm, it's the size of a notebook. It can be used at anywhere and only takes up a little space. It will not get in the way of your work and avoid the clutter of the workbench.
- Filter PLUS - Solder smoke absorber has 3 stage filter. The first layer of high-density filter screen preliminarily filters PM50, the second layer of H-E-P-A dust collection filter screen filters PM0.5, and the third layer of activated carbon dust removal filter screen absorbs harmful gases. Multiple filtration ensures your safety.
- Purification MAX - The BAOSHISHAN fume extractor creates a powerful air volume to exhaust and purify air. The solder fume extractor can rapidly purify, quickly absorb smoke within 1 second. High purification rate allow you to breathe fresh air again and protect your respiratory tract and lungs.
- Tube TELESCOPIC - The smoke sucker tube can be stretched and deformed at will. It can support its own weight, can stay mid air without support. You can bend the tube to just about any position for your projects, the base weighs enough that it won't fall over.
- Install EASY - The tube and fume extractor can be installed only by rotating counterclockwise according to the thread, which is 100% suitable. Just open the metal lock to replace the filter separately and we will provide additional 4pcs pre-filters for free.
- Absorb Harmful Fumes: The filter consists of foam and activated carbon, which can absorb toxic fumes from solder, Prevent the smoke from emitting into the room, protect human health.
- Low-noise & Odourless: Soldering fan uses a double roller design, there is low-noise and odourless in the process of use, let you feel immersed in work.
- Excellent Suction: The optimized fume extrator’s air flow is up to 110CFM/3080L/min, so it has stronger suction. perfect for soldering project.
- Anti-skid Design: The upgraded fume extractor has an anti-slip cotton at the bottom, which can be used to prevent slip and reduce vibration noise, giving you a quiet working space.
- Easy to Use: Unique design for disassembly, activated carbon filter can easy to be replaced at any time. Including one replacement filter.
- INDUSTRIAL FUME EXTRACTOR: The 330W DC motor on OMTech's industrial-strength XL-300 fume extractor creates a powerful 69 ft./sec. airflow to pull in exhaust and purify air during any project; perfect for any size OMTech laser engraving machine, it also works well with welding tools, soldering stations, CNC machines, and more; the provided 4" to 6" adapter lets this fume extractor connect to larger OMTech cutting and engraving machines
- 5-STAGE FILTER: Our smoke extractor continuously pulls in your machine's fumes and debris, running them progressively through its cotton outer filter, two polypropylene layers, and two inner activated charcoal filters to absorb all your work's harmful gases and unpleasant odors
- HIGHLY MOBILE: The 4 quality caster wheels move this small but dependable smoke purifier easily between your devices when needed and then lock smartly in place once you're ready to go; the hermetically-sealed extraction tube easily folds and fixes at the perfect angle wherever you need it
- INTUITIVE CONTROL: The digital control panel lets you easily adjust this purifier's air flow and offers timed operation to match each job; the included remote also allows you to stay in complete control of its operation from up to 33 ft. away to let you make quick adjustments as you work
- SATISFACTION GUARANTEED: OMTech backs this fume extractor with our usual strong warranty and friendly 24/7 customer service, ensuring that you'll enjoy its use for years to come!
Last update on 2022-05-18 / Affiliate links / Images from Amazon Product Advertising API
How to Buy the Best Solder Fume Extractor
Does shopping for the best Solder Fume Extractor get you stressed? Are doubts rolling over in your head and confusing you? We know how it is. We have brainstormed some questions that most of you might have in mind. We have travelled the entire journey of Solder Fume Extractor research, and we have compiled a full list of the best Solder Fume Extractor presently available in the market.
Although there may be more names than those which we are suggesting here, it is important for you to ensure that you conduct extensive research for this product before buying it for yourself.
Some questions your research needs to answer may include:
• Is a Solder Fume Extractor worth the purchase?
• What are the advantages of buying a Solder Fume Extractor?
• What factors should I consider before shopping for the best Solder Fume Extractor?
• Why is it important to invest in a Solder Fume Extractor, especially the best one?
• What are the good Solder Fume Extractor available in today’s market? Or,
what is the best Solder Fume Extractor of 2022, 2021, 2023, 2024?
We are sure that you may have many more questions. And, where would you get all this kind of information? The best way to quench your thirst for answers is to get them all solved from various online resources.
Proper research is essential before buying the best Solder Fume Extractor for yourself. Sources may be anything such as online forums, word-of-mouth, rating websites, buying guides, and product reviews. Ensure that you are reading from highly reliable, trustworthy websites or any other sources.
We offer a buying guide for Solder Fume Extractor, and we provide 100% genuine and unbiased information. We make use of Big Data and AI data to proofread the information. How have we made this buying guide? We have a uniquely designed set of algorithms, which enable us to make a list of top 10 Solder Fume Extractor that are available in the marketplace these days.
Our technology for bringing together a list depends on the factors such as:
1. Product Value
2. Brand Value
3. Features & Specifications
4. Quality and Durability
5. Customer Reviews & Ratings
Keeping product information up to date is our priority; therefore, we keep our websites updated at all times. Get more information about us through online sources.
If you feel that the information given here is misleading or is incorrect or is irrelevant or different from facts, then please do not hesitate to get in touch with us. We will always be there for you.